If you love watching TV in your RV, you need a mount that keeps it safe while you drive. Bumpy roads and sharp turns can send a loose TV flying, so a strong, locking mount is a must. The best RV TV mounts hold your screen tight, reduce vibration, and let you tilt or swivel for a perfect view. This guide breaks down the top picks that are easy to install and built for life on the road.
1. ELIVED Lockable Full Motion RV TV Mount
- TV Size Compatibility: 13 to 43 inches
- Weight Capacity: 22 lbs (10 kg)
- VESA Patterns: 50x50mm up to 200x200mm
- Movement: +5°/-15° tilt, +/-90° swivel
The ELIVED Lockable RV TV Mount is a high-strength steel solution designed to keep your screen safe during bumpy travels. Its standout feature is the one-step locking mechanism, which utilizes a simple pull strap to secure or release the articulating arm instantly. This ensures the television does not swing out or vibrate while the vehicle is in motion.
This versatile mount includes two separate wall plates, allowing you to move your TV between indoor and outdoor locations effortlessly. With an extension reach of over 14 inches and the ability to retract to a slim 3.15 inches, it offers an optimized viewing experience while maintaining a space-saving profile. Installation is straightforward and typically takes less than 30 minutes.
- Pros:
- Includes two wall plates for relocation
- Reliable pull-strap locking system
- High-quality vibration-resistant steel
- Cons:
- Limited to 22 lbs capacity
- Requires minimum 1/2 inch wall board
2. VIVO Quick Release Articulating RV Mount
- Screen Sizes: 13″ to 43″ displays
- Max Load: 33 lbs capacity
- VESA Range: 75x75mm to 200x200mm
- Tilt Range: +55° to -35° adjustment
VIVO’s Quick Release RV mount is engineered for flexibility and stability in a mobile environment. It utilizes a dual mounting plate system, making it perfect for campers who enjoy watching television both inside the cabin and at an outdoor workstation. The stepped joints are a key design element, specifically crafted to prevent in-transit vibration and keep the arm rigid.
The mount offers an impressive range of motion, including a deep tilt to eliminate screen glare from various seating heights. For those concerned about cable management, the integrated cable clip routes cords neatly through the articulating arm. This keeps your RV interior looking organized and prevents wires from getting snagged when extending or retracting the bracket.
- Pros:
- Exceptional tilt range for glare reduction
- Integrated cable management clips
- Higher 33 lbs weight capacity
- Cons:
- Quick-release latch can be stiff
- Arm extension is slightly shorter than rivals
3. MOUNTUP Lockable Full Motion RV Bracket
- Universal Fit: 13-43 inch flat screens
- Weight Rating: Up to 33 lbs
- Low Profile: Retracts to 2.7 inches
- Post-Install: +/-3° leveling adjustment
The MOUNTUP RV TV mount provides a secure and space-saving solution for motorhomes and fifth wheels. It features a reliable pull-cord spring lock that holds the television firmly against the wall plate during travel. This prevents accidental wobbling or damage when navigating rough terrain. When parked, the cord allows for a quick release to extend the TV up to 14 inches.
This mount excels in ergonomics, offering a 15-degree downward tilt and 90-degree swivel to provide the perfect viewing angle from any seat. The inclusion of post-installation leveling ensures that even if your wall isn’t perfectly straight, your TV will be. It is built for longevity and is backed by a professional support team for installation assistance.
- Pros:
- Very slim 2.7″ retracted profile
- Reliable spring-loaded locking mechanism
- Helpful post-installation leveling feature
- Cons:
- Pull cord may require occasional tightening
- Not compatible with 100x200mm VESA
4. Perlegear Heavy Duty Lockable RV Wall Mount
- Load Capacity: Heavy duty 44 lbs
- Max Extension: 18.97 inch long reach
- Wall Types: Wood stud, concrete, or brick
- VESA Range: 75x75mm to 200x200mm
Perlegear offers a heavy-duty solution for RV owners with larger or older, heavier televisions. Constructed from premium steel, this mount supports up to 44 lbs, providing ultimate peace of mind. The articulating arm has a massive reach of nearly 19 inches, making it a game-changer for corner installations or viewing from the kitchen area.
The pull-cord locking mechanism keeps the entire unit steady on rough roads, yet releases easily when you reach your destination. It can retract to just 2.36 inches, keeping the TV out of the way when not in use. This mount’s versatility and strength make it one of the most reliable choices for larger motorhomes and camper vans.
- Pros:
- Industry-leading 44 lbs capacity
- Extra-long 18.97″ extension arm
- Very low-profile retracted design
- Cons:
- Heavier unit adds weight to RV walls
- Pull cord can be seen behind small TVs
5. VIVO Low Profile Quick Disconnect Bracket
- Materials: Plastic polymer and steel
- VESA Size: Fixed 100x100mm pattern
- Weight Limit: 22 lbs
- Articulation: 180° swivel, +/-30° rotation
This VIVO mount is a lightweight, budget-friendly option for smaller screens within an RV. It features a unique two-part VESA bracket for quick disconnection, allowing the user to remove the screen in seconds. This is particularly useful for security or for stowing the television away in a safe location while the vehicle is in motion on the highway.
The blend of plastic polymer and steel keeps the unit light without sacrificing the necessary strength for screens up to 22 lbs. While it doesn’t feature a mechanical lock, its slim design and 180-degree swivel provide excellent functionality for indoor use. It maintains a very modern, low-profile appearance that blends seamlessly with dark RV interiors.
- Pros:
- Very easy quick-disconnect feature
- Lightweight and sleek construction
- Highly affordable price point
- Cons:
- No built-in travel locking mechanism
- Fixed 100x100mm VESA only
6. Mounting Dream UL Listed Lockable RV Mount
- Safety Rating: UL Listed for security
- Construction: Robot-welded high-grade steel
- Max Extension: 18.4 inch articulating arm
- Warranty: 10-year manufacturer coverage
The Mounting Dream MD2210 is a UL-listed bracket that prioritizes safety and durability through robot-welding technology. It is capable of supporting up to 44 lbs, making it suitable for a wide variety of 17-43 inch televisions. The unique one-step locking mechanism secures both the swivel arms and the TV plate simultaneously to prevent any movement.
With a generous 18.4-inch extension, this mount allows for flexible viewing angles throughout your camper or boat. The installation process is simplified by pre-labeled hardware bags and clear instructions. Furthermore, a 5-degree post-installation leveling feature allows you to correct the TV’s alignment after the wall plate has been securely mounted to the vehicle.
- Pros:
- UL listed for tested safety standards
- 10-year warranty for peace of mind
- Simultaneous arm and plate locking
- Cons:
- Minimum TV size of 17 inches required
- Strap can be hard to reach on large TVs
7. Mount-It! Rust-Resistant Dual Plate TV Mount
- Material: Rust-resistant aluminum
- Plates: Dual wall plates included
- Locking: Toothed locking system
- Extension: Up to 15.3 inches reach
Mount-It! has created the ultimate outdoor-ready TV mount using rust-resistant aluminum. This makes it the ideal choice for trailers and campers where the television might be moved to an exterior mounting point. The dual wall plates facilitate this transition effortlessly, while the aluminum construction ensures the arm won’t corrode when exposed to humidity or salt air.
The mount utilizes a unique toothed locking system that secures every joint, effectively eliminating the vibration that often plagues RV entertainment systems. It offers a full range of motion, including a 15-degree tilt and 90-degree swivel. This bracket combines high-end durability with the flexibility needed for a truly modern mobile lifestyle.
- Pros:
- Lightweight rust-resistant aluminum build
- Toothed locking system for every joint
- Perfect for indoor and outdoor use
- Cons:
- Aluminum is less rigid than heavy steel
- Toothed joints can be slower to adjust
How to Choose TV Mounts For RV
Living the RV lifestyle doesn’t mean you have to sacrifice the comforts of home, especially when it comes to entertainment. However, mounting a television in a motorhome is vastly different from doing so in a traditional house. Your RV is essentially a rolling earthquake; it experiences constant vibrations, sharp turns, and sudden stops. Choosing the right TV mount is not just about viewing angles; it is about protecting your investment and ensuring safety on the road.
The Critical Difference: Why You Need a Specialized RV Mount
Many first-time RVers make the mistake of buying a standard residential TV mount. While these work fine for stationary walls, they lack the “travel lock” features necessary for a moving vehicle. Without a locking mechanism, a full-motion arm can swing out during a turn, potentially shattering the TV screen or damaging the RV wall. Specialized RV mounts are engineered with heavy-duty locks—often featuring pull-straps or toothed joints—to keep the unit rigid while driving.
Understanding Weight Capacity and VESA Patterns
Before you browse for a mount, you must know the specifications of your television. Two factors are non-negotiable: weight and the VESA pattern.
Weight Considerations
RV walls are often made of thin plywood or aluminum studs. You must ensure your chosen mount can support the weight of your TV, but also that your wall can support both. Most RV mounts are rated for 22 to 44 lbs. Always choose a mount with a capacity slightly higher than your TV’s actual weight to account for the extra G-forces experienced during travel.
VESA Pattern Compatibility
VESA is the standard for the distance between the four mounting holes on the back of your TV. Common patterns for smaller RV TVs include 75x75mm, 100x100mm, and 200x200mm. Most modern mounts are “universal,” meaning they have multiple hole patterns to fit various brands, but you should always double-check your TV’s manual before purchasing.
Key Features to Look For
The best TV mounts for RV use offer specific features that cater to the unique constraints of a camper or trailer.
Locking Mechanisms
Look for a “one-step” or “pull-cord” lock. These allow you to push the TV against the wall until it clicks into place. When you arrive at your campsite, a simple tug on a strap releases the arm. Some premium models also feature toothed joints that lock every articulating point, providing maximum stability against engine vibration.
Full Motion vs. Fixed Mounts
Space is at a premium in an RV. A full-motion (articulating) mount allows you to pull the TV out and swivel it toward the kitchen, the bed, or the seating area. However, these require more horizontal space when retracted. A fixed or tilting mount is better for tight hallways or bedroom areas where the TV only needs to be viewed from one spot.
Quick-Release and Dual Wall Plates
Many RVers love “tailgating” or watching movies under the stars. Some mounts come with a quick-release feature and two separate wall plates. You can have one plate installed in the living area and another on the exterior of the RV. This allows you to slide the TV off the indoor bracket and onto the outdoor one in seconds.
Material and Durability
Steel is the standard material for TV mounts due to its strength. However, if you plan to use your TV mount in an outdoor setting or a high-humidity environment (like a boat or near the coast), consider a rust-resistant aluminum mount. Aluminum is lighter and naturally resistant to corrosion, though it may have a slightly lower weight capacity than heavy-gauge steel.
Installation Tips for RV Walls
Installing a mount in an RV requires a bit more finesse than a home installation. Here are the steps to ensure a secure fit:
Find the Studs
Never mount a TV directly into the thin wood paneling of an RV wall. You must locate the wall studs. In many RVs, these are aluminum. Use a stud finder specifically designed for metal or look for the row of staples/screws in the paneling which usually indicates the stud location.
Check Wall Thickness
Most RV TV mounts require a wooden board or stud at least 1/2 inch thick. If your wall is too thin, you may need to mount a larger “backer board” (usually a piece of 3/4 inch plywood) to the wall first, spreading the load across multiple studs, and then attach the TV mount to that board.
Cable Management
While driving, loose cables can flap around and cause noise or even unplug themselves. Look for mounts with built-in cable management clips or use Velcro ties to secure the power and HDMI cords along the articulating arm. This keeps the installation looking professional and prevents wire fatigue.
The Importance of Leveling
Your RV is rarely perfectly level, and your installation might not be either. Choose a mount that offers “post-installation leveling.” This feature allows you to rotate the TV bracket a few degrees clockwise or counter-clockwise after it’s already on the wall, ensuring your horizon line is straight even if the mount was screwed in slightly crooked.
Conclusion
Investing in one of the best TV mounts is the only way to guarantee that your road trip entertainment doesn’t end in a broken screen. Focus on a mount with a high-quality locking system, verify your TV’s VESA pattern, and ensure your RV wall is reinforced enough to handle the weight. With the right mount, you can enjoy glare-free viewing in the wilderness and total peace of mind while cruising the highway.
